Photo

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  No...

This 15 Watt Compact Fluorescent Bulb fits the light fixture in the following PHOTO STUDIO IN A BOX model: SIB-077 SIB-105CS This bulb can be use...

Attach to edge of cheese plate for adapting 15mm rods.

This 4 ½” Grip head with a Junior Stud and receiver is designed to convert a Junior Stand into an overhead stand. It will allow the use of Junior a...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  No...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

This Grip Head can be mounted on a stand with its 5/8" socket. The holes in the grip head are used to mount arms, studs, and other accessories onto...

This Grip Head can be mounted on a stand with its 5/8" socket. The holes in the grip head are used to mount arms, studs, and other accessories onto...

This 22” Flex arm has a 13mm diameter with brass studs on each end. One end has a 5/8” Hex stud with a female threaded 3/8” female mount. The other...

This 22” Flex arm has a 18mm diameter with brass studs on each end. One end has a 5/8” Hex stud with a female threaded 3/8” female mount. The other...

This is a 24”, 2 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

This is a 24” 2 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main center...

This 30 Watt Compact Fluorescent Bulb fits the light fixture in the following PHOTO STUDIO IN A BOX model: LAMP-Q-250W     - SIB-200 This bulb ca...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

Basic 3" spring clip with hundreds of uses in the studio and on location.

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

3” Spring clamp with 1 1/2” pipe clamp parallel to clamp.  The 3” jaws have rubber protective covers and will open to 2”.  The 3” jaws have rubber ...

3” Spring clamp with 1 1/2” pipe clamp right angle to clamp.  The 3” jaws have rubber protective covers and will open to 2”.  The 3” jaws have rubb...

This 30 Watt Compact Fluorescent Bulb fits the light fixture in the following PHOTO STUDIO IN A BOX model: SIB-201 This bulb can be use in most o...

This is a 33”, 3 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

This is a 34”, 3 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

This 35 Watt Tungsten Halogen Bulb fits the following light fixtures for these PHOTO STUDIO IN A BOX models: SIB-075 SIB-101  The special COLOR...

Long-lasting and cool running, bright LED Light for all your photographic requirements.  Camera shoe allows attachment to any camera and has a thre...

This 4 ½” Grip head with a Junior Stud and receiver is designed to convert a Junior Stand into an overhead stand. It will allow the use of Junior a...

This 50 Watt Tungsten Halogen Bulb fits the light fixture of the following PHOTO STUDIO IN A BOX model: SIB-100 This light bulb can be used with ...

This 2” wide padded Jaw clamp can be attached to beams, tables, pipes, etc. Each Jaw Clamp includes a 5/8” stud to mount accessories. The bold thre...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

7 inch table top camera stand with shoe mount has retractable legs so it can be used as a handheld unit.  Shoe mount can pivot 180 degree angle adj...

This 30 Watt Compact Fluorescent Bulb fits the light fixture in the following PHOTO STUDIO IN A BOX model: SIB-180 This bulb can be used with oth...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Umbrella/Stand mount with Coldshoe Speedlight mount. This Bracket has a 5/8” socket for stand mounting and an 8mm hole to insert your umbrella. It ...

This coupler can be used on up to mount lights and other accessories on pipe girds up to 2” diameter and creates an extremely strong mount point. C...

This coupler can be used to mount lights and other accessories on pipe girds up to 2” diameter and creates an extremely strong mount point. Coupler...

Couplers like this are used to mount lights and other accessories on pipe grids and railings. These couplers can be used on up to 2” pipes and crea...

The Spring loaded Adjustable clamp with 3 mounting points and stud adapters give you the option of accessory mounting almost anywhere. The strong a...

This is a very heavy duty adjustable clamp. The spring loaded padded jaws will mount most anywhere and can be tightened using the large round knob ...

The Baby Drop Down mounts on a 5/8” stud or on a stand with a baby pin and gives you more freedom in directing and placing your lights and accessor...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

8 inch tall battery powered, table-top lamp fixtures with 36 bright light LEDs for all your photographic requirements or to add extra lighting to y...

Allows any brand of binoculars with a tripod mounting screw to mount onto a tripod using 1/4"-20 thread.

This Spring clamp with 5/8” socket and stud gives you the freedom to attach lights and accessories in convenient or unusual places. The jaws are pr...