GTX Grip

Counterweight can be used with any light stand or boom. Sandbag has two pocketswhich can be filled with sand or shot to produce the counterbalance ...

These light stands are great for light and medium weight strobes, flash units, LED lights and softboxes. Extends to 8 feet (96 inches) tall Folds ...

These light stands are great for light and medium weight strobes, flash units, LED lights and soft boxes. Extends to 6 feet (72 inches) tall Fold...

Perfect light stand for table top photography or lighting backgrounds. The stand has two sections, includes a 5/8” post and a 1/4x20 male threaded ...

Standard 1 Inch Tubular Legs Opens to 9 ft 10 in.  35 Inches Closed Light Weight Aluminum Construction 2.4 Kg 6 Lb Weight Limit

Opens to 8 Feet 30 Inches Closed Air Cushioned ¼ x 20 Threaded Stud on 5/8 Inch Stud Top 5/8 Stud can Mount at 90 Degree Angle 9 lb Weight Limit

Standard 1 Inch Tubular Legs Opens to 9 ft 10 in.  35 Inches Closed Light Weight Aluminum Construction 2.4 Kg 6 Lb Weight Limit

¾ x 1 ½ Rectangular Steel Tube Legs for Strength Locking Casters/Legs Fold Up for Transport 5/8 inch Baby Pin Stand - Diameter of Tubes (mm) –25/...

39 inch Center column 3 Section Jr Stud

¾ x 1 ½ Rectangular Steel Tube Legs for Strength Locking Casters/Legs Fold Up for Transport Jr Receiver with Pop-Up 5/8 Inch Baby Pin Stand - Dia...

Stand Disassembles for Transport/Bag Included ¾ x 1 ½ Rectangular Steel Tube Legs for Strength Locking Casters/Legs Fold Up for Transport Include...

Rugged durable for on the set and location shoot Removable Turtle Base 40 Inch Main Section w/ 2 Risers Minimum Height: 53"/10 Ft Maximum Height 2...

Rugged durable for on the set and location shoot Removable Spring Loaded Turtle Base 20 Inch Main Section w/ 2 Risers – 5.25 Ft Maximum Height 2.5...

Sliding Leg for Uneven Surfaces Stainless steel  50 Inch Stainless Steel Main Section w/ 2 Risers Stainless steel resist moisture and elements Min...

Sliding Leg for Uneven Surfaces Stainless steel  40 Inch Stainless Steel Main Section w/ 2 Risers Stainless steel resist moisture and elements Min...

Fits all Studio C-Stands Locking brakes Weight 5 lbs

Sliding Leg for Uneven Surfaces 20 Inch Main Section w/ 2 Risers Stainless steel resist moisture and elements Minimum Height 30"/5.25 Ft Maximum H...

Q SERIES 9.4 ft. LIGHT STAND - 3 SECTION ¼ Turn Quick Lock System Opens to 9 ft 4 in 41 Inches Closed Air Cushioned ¼ x 20 Threaded Stud on 5/8 ...

Q SERIES 8 ft. LIGHT STAND - 4 SECTION ¼ Turn Quick Lock System Opens to 8 Feet 29 Inches Closed Air Cushioned ¼ x 20 Threaded Stud on 5/8 Inch ...

Q SERIES 15 ft. LIGHT STAND - 5 SECTION ¼ Turn Quick Lock System Opens to 8 Feet 29 Inches Closed Air Cushioned ¼ x 20 Threaded Stud on 5/8 Inch...

L SERIES LIGHT STAND 24 INCH - 2 SECTION 3 Swivel Folding Legs 24 Inch Center Column is Removable Using the included Threaded 5/8 Inch stud, a L...

6.5 FT L SERIES LIGHT STAND - 5 SECTION WITH HEAVY DUTY TUBES Reverse Leg Light Stand is Compact When Closed Opens to 6.5 Ft. 19 Inches Closed  ...

Boom Arm Only with Mount 2 Section Extends to 7 Ft (2200mm) Baby Pin for Mounting Lights Closed Length: 47 Inches Boom - Diameter of Tubes (mm) ...

Boom Arm Only with Mount 2 Section Heavy Duty Wheeled Stand Extends To 7 Ft With 1 1/8 Inch Jr Receiver 2 Section Boom Arm Extends To 8 Ft (2600...

Boom Arm Only with Mount 2 Section Extends to 7 Ft (2100mm) Closed Length: 47 Inches Jr Receiver/Baby Pin for mounting lights Boom - Diameter of...

This is a very heavy duty adjustable clamp. The spring loaded padded jaws will mount most anywhere and can be tightened using the large round knob ...

The Spring loaded Adjustable clamp with 3 mounting points and stud adapters give you the option of accessory mounting almost anywhere. The strong a...

This coupler can be used on up to mount lights and other accessories on pipe girds up to 2” diameter and creates an extremely strong mount point. C...

This Grip Head can be mounted on a stand with its 5/8" socket. The holes in the grip head are used to mount arms, studs, and other accessories onto...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

This is a 34”, 3 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

Umbrella/Stand mount with Coldshoe Speedlight mount. This Bracket has a 5/8” socket for stand mounting and an 8mm hole to insert your umbrella. It ...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This 2” wide padded Jaw clamp can be attached to beams, tables, pipes, etc. Each Jaw Clamp includes a 5/8” stud to mount accessories. The bold thre...

This 4 ½” Grip head with a Junior Stud and receiver is designed to convert a Junior Stand into an overhead stand. It will allow the use of Junior a...

This is a 33”, 3 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

3” Spring clamp with 1 1/2” pipe clamp parallel to clamp.  The 3” jaws have rubber protective covers and will open to 2”.  The 3” jaws have rubber ...

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

This is a 24” 2 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main center...

This 22” Flex arm has a 18mm diameter with brass studs on each end. One end has a 5/8” Hex stud with a female threaded 3/8” female mount. The other...

This Grip Head can be mounted on a stand with its 5/8" socket. The holes in the grip head are used to mount arms, studs, and other accessories onto...

This 4 ½” Grip head with a Junior Stud and receiver is designed to convert a Junior Stand into an overhead stand. It will allow the use of Junior a...

Attach to edge of cheese plate for adapting 15mm rods.